Rockwell Automation 1771-IFE ANALOG INPUT MODULE - Manual (Page 50)

6–5 Calibrating Your Module
Publication 1771Ć6.5.115 - February 1999
The BTR echoes back the status of each of the channels to verify the
calibration. If all channels were calibrated satisfactorily, the BTW
will reflect this by having all bits set to 1.
Read Block Transfer Word 22
Decimal Bits 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Octal Bits 17 16 15 14 13 12 11 10 07 06 05 04 03 02 01 00
Word 22
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Word 22
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
In this chapter, you learned how to calibrate your input module.
Chapter Summary