Rockwell Automation 1746-HSCE2 Multi-Channel High Speed Counter Module - Manual (Page 78)

Publication 1746-UM002B-EN-P - August 2004
4-28 Configuration and Programming
Programming Block Default
Values The following tables list the default values for all of the programmed
parameters in each class and operating mode. The default operating
mode for each class is mode 1.
Class 1
Figure 4.10 Determining Actual Outputs
Range Bit Setting 1 1 0 0 1 1 0 0
Output ON Mask 0 0 0 1 0 0 0 1
Output Enable Mask 0 0 0 0 1 1 1 1
Actual Outputs 0 0 0 0 1 1 0 1
Table 4.11 Class 1, Mode 1 Default Values
Parameter Counter 1 Counter 2
Debug Mode Selection Inactive
Range Allocation 8 8
Counter Type Ring Ring
Input Configuration X1 Quadrature X1 Quadrature
Gate/Preset Mode Store/Preset/Start Store/Preset/Start
Minimum Count -32,767 -32,767
Maximum Count +32,767 +32,767
Minimum Rate -32,767 -32,767
Maximum Rate +32,767 +32,767
Preset Value 0 0
All Output Ranges Not programmed.
Interrupt Enable Interrupt disabled
Rate Value Format Integer (not programmable)