Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 31)

Publication 1734-UM015A-EN-E - November 2009
Install ArmorPOINT I/O DeviceLogix Modules 29
Install the Module Follow the instructions to install the module.
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number 1 aligns with the notch in the base.
2. Position the module vertically above the mounting base.
The module bridges two bases.
3. Push the module down until it engages the latching mechanism.
You will hear a clicking sound when the module is properly engaged.
The locking mechanism locks the module to the base.
Keyswitch
43675
Set to position 1, for the
1738 24V DC modules
1738-8CFGDLXM12
24V DC Out
MOD
NET
DLX
A
H
B G
C F
D E
0
1
2
3
4
5
6
7
Module bridges two bases
43771
1738-8CFGDLXM12
shown