Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 34)

Publication 1734-UM015A-EN-E - November 2009
32 Install ArmorPOINT I/O DeviceLogix Modules
1738-8CFGDLXM23 I/O Module
1738-8CFGDLXM23 Wiring Diagram
The ArmorPOINT I/O DeviceLogix module gets its power from the Field
Power Bus of the backplane. Depending on your system and network
topology, power can be applied through one of the following:
• 1738-ADN12 or 1738-ADN18, 1738-ADN18P, 1738-ADNX
(DeviceNet adapter)
• 1738-ACNR (ControlNet adapter)
• 1738-AENT or 1738-AENTR (EtherNet/IP adapter)
• 1738-EP24DC (Expansion power supply)
• 1738-FPD (Field power distribution)
1738-8CFGDLXM23
24V DC In
MOD
NET
0
1
2
3
4
5
6
7
DLX
44353
LED indicators
M23 connector
43681
(view into connector)
Pin 1 - I/O 0
Pin 2 - I/O 1
Pin 3 - I/O 2
Pin 4 - I/O 3
Pin 5 - I/O 4
Pin 6 - I/O 5
Pin 7 - I/O 6
Pin 8 - I/O 7
Pin 9 - Return (Com)
Pin 10 - Return (Com)
Pin 11 - 24V DC
Pin 12 - Chassis