Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 88)

Publication 1734-UM015A-EN-E - November 2009
86 Troubleshooting
Status Indicators of
ArmorPOINT I/O Modules See the figure and tables that show how to interpret the status indicators.
1738-8CFGDLXM8, 1738-8CFGDLXM12, and 1738-8CFGDLXM23
Module Status
Indication Description Recommended action
Off No power applied to device. Apply power to device.
Green Device operating normally. None.
Flashing
green Device needs commissioning due to
missing, incomplete, or incorrect
configuration. Configure device properly.
Red Unrecoverable fault – may require
device replacement. Replace device.
Flashing red Recoverable fault. Cycle power to device.
If condition persists, replace
device.
Flashing
red/green Device is in self-test. None.
1738-8CFGDLXM12
24V DC Out
MOD
NET
0
1
2
3
4
5
6
7
A H
B G
C F
D E
DLX
Module Status Indicator
44355
Network Status Indicator
I/O Status Indicators
1738-8CFGM12 shown