Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 50)

Publication 1734-UM015A-EN-E - November 2009
48 DeviceLogix for POINT I/O and ArmorPOINT I/O on Ethernet/ControlNet
5. Select Pointbus Port, DeviceNet and click OK.
RSNetWorx automatically browses the network to discover all the
participating modules.
6. If you are configuring the module offline, you must download the
configuration to the module after you go online. To do this, right-click
the module’s icon and select Download to Device.
7. To change the configuration of a module, double-click that module’s
icon. Alternatively, you can right-click the icon and select Properties.
Details on configuring the module can be found in Chapter 6 .
IMPORTANT
Note the online path in the Messages window at the bottom
half of the screen. This path will be saved in the DNT file. To
open the file, select Properties on the Network menu.