Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 96)

Publication 1734-UM015A-EN-E - November 2009
94 Peer Data Maps
In the following sections, the input tag name in the DeviceLogix editor is given
in the left column, and a description of the tag is given in the right column.
This section is intended to be used as a quick guide. For details, refer to the
installation instructions or user manual for the specific peer module.
2-Point Digital Input Modules
1734-IB2, 1734-IV2, 1734-IA2, 1734-IM2, 1738-IB2M12, 1738-IB2M8,
1738-IA2M12AC3, 1738-IA2M12AC4
4-Point Digital Input Modules
1734-IB4, 1734-IV4, 1734-IA4, 1734-IM4, 1738-IB4M12, 1738-IB4M8,
1738-IV4M12, 1738-IV4M8
Input Tags for 2-Point Digital Input Modules
Input Tag in DeviceLogix Editor Data
Peer X (byte 0, bit 0) Input channel 0
Peer X (byte 0, bit 1) Input channel 1
Input Tags for 4-Point Digital Input Modules
Input Tag in DeviceLogix Editor Data
Peer X (byte 0, bit 0) Input channel 0
Peer X (byte 0, bit 1) Input channel 1
Peer X (byte 0, bit 2) Input channel 2
Peer X (byte 0, bit 3) Input channel 3