Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 86)

Publication 1734-UM015A-EN-E - November 2009
84 Troubleshooting
Status Indicators of POINT
I/O Module See the figure and tables that show how to interpret the status indicators.
1734-8CFGDLX Module
Module Status
Indication Probable Cause Recommended Action
Off No power applied to device. Apply power to device.
Green Device operating normally. None.
Flashing
green Device needs commissioning due to
missing, incomplete or incorrect
configuration. Configure device properly.
Flashing red Recoverable fault. 1. Cycle power to device.
2. If condition persists, replace
device.
Red Unrecoverable fault may require
device replacement. Replace device.
Flashing
red/green Device is in self-test. None.
1
3
0
2
Module
Status
Network
Status
Device
Logix
Status
1734
8CFGDLX
1
3
0
2
5
7
4
6
NODE:
44759
Status of I/O 0
Status of I/O 1
Status of I/O 2
Status of I/O 3
Status of I/O 4
Status of I/O 5
Status of I/O 6
Status of I/O 7
Module Status
Network Status
DeviceLogix Status