Rockwell Automation 1734-XXXX POINT I/O and ArmorPOINT I/O DeviceLogix User Manual - Manual (Page 76)

Publication 1734-UM015A-EN-E - November 2009
74 DeviceLogix Capabilities
Digital Outputs from Function Blocks
Hardware
Discrete Output 0 through Discrete Output 7 are the eight hardware outputs
available on the module. If these tags are unused (that is, not mapped in the
DeviceLogix program), then there is a virtual mapping from the Data Byte
Output Assembly to the output point. This means that the output is under
control of the owning processor. If the Discrete Output is mapped in logic, it
is controlled by the module.
Virtual Connection if Output Not Used in Logic
Discrete Output 0
Consume Data Assembly
Byte 0 7 6 5 4 3 2 1 0
44953