Rockwell Automation 1756-xxxx ControlLogix Chassis and Power Supplies Installation Instructions - Manual (Page 14)

14 Rockwell Automation Publication 1756-IN005C-EN-P - March 2014
Chapter 1 Install Chassis and Power Supplies
Follow These Steps
1756-A13 4 top
4 bottom • 4 Phillips screws
• 4 flat washers
• 4 split-lock washers
• 4 SEM screws • 8 Phillips screws
• 4 flat washers
• 4 split-lock washers
• 4 star washers
1756-A17 5 top
5 bottom • 5 Phillips screws
• 5 flat washers
• 5 split-lock washers
• 5 SEM screws • 10 Phillips screws
• 5 flat washers
• 5 split-lock washers
• 5 star washers
Table 2 - Total Parts Required Per Chassis
Chassis Number of
Mounting Tabs Total Parts Required Per Chassis
With SEM Screws Without SEM Screws
Plan the System
page 15
Install the Chassis and
Power Supply
page 21
Ground the Chassis
page 23
Connect the Power
page 27
Remove the Protective Label
page 28
Apply Power to the Chassis
page 28