Rockwell Automation 1756-xxxx ControlLogix Chassis and Power Supplies Installation Instructions - Manual (Page 22)

22 Rockwell Automation Publication 1756-IN005C-EN-P - March 2014
Chapter 1 Install Chassis and Power Supplies
5. Leaving the far-left bottom tab open for functional ground, install the
remaining tab screws.
6. Align the power-supply circuit board with the card guides on the left side
of the chassis and slide the power supply back until it is flush with the front
of the chassis.
7. Tighten the top and bottom screws to fasten the power supply to the
chassis.
20290-M
Leave far-
left bottom
tab open.
Card Guide
43614
43614