Rockwell Automation 1756-xxxx ControlLogix Chassis and Power Supplies Installation Instructions - Manual (Page 17)

Rockwell Automation Publication 1756-IN005C-EN-P - March 2014 17
Install Chassis and Power Supplies Chapter 1
Mounting Dimensions
Use these dimensions to plan your chassis installation.
Dimensions are in cm (in.).
Figure 1 - Chassis Common Dimensions
Figure 2 - 1756-A4 Chassis and Power Supply
1.1
(0.433)
0.55
(0.217)
Top Mounting
Hole Diameter Bottom Mounting
Hole Diameter
Right-side View of All Standard Chassis
16.9
(6.65)
14.5
(5.71)
0.78
(0.31)
43591
45797
16.9
(6.65)
14.9
(5.87)
45865
Right-side View of All ControlLogix-XT Chassis
7.0
(2.76)
4.71
(1.85)
16.9
(6.65)
26.3
(10.34)
43592
15.8
(6.22)
14.5
(5.70)