Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 126)

Appendix
B
Publication 2755-6.7
Enhanced Decoder Application
This appendix describes how to configure and operate the scanner
when connected to an Allen-Bradley Enhanced Decoder (Catalog
No. 2755-DD/DS).
•
using the RS-232 port for output
•
using the AUX port for Pass-Through
This section also provides configuration information for an Auxiliary
Port Pass Through application for the enhanced decoder.
!
ATTENTION: Do not install the scanner emulation
Synapse cable with power applied to either the Synapse
cable or enhanced decoder. Failure to follow this
caution may result in damage to the scanner, Synapse
cable, or enhanced decoder.
For additional reference you should refer to the following
publications:
•
DS/DS Enhanced Decoder User Manual (Publication No.
2755-833)
•
Gun Adapter Product Data Sheet (Publication No. 2755-2.37)