Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 148)

PLC-5 Controller Application E–3
Publication 2755-6.7
Configuration Codes for PLC Application
1. After making the necessary connections, scan the following
following bar code symbol to set the scanner to its default
settings.
Set Scanner Defaults
2. Set the RS-232 Synapse cable to defaults by scanning this label.
Set RS-232 Synapse Cable Defaults
3. Set the bar code suffix to CR LF (ASCII equivalent 7013) by
scanning the following labels.
Suffix
7 0
1 3