Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 44)

Chapter
3
Publication 2755-6.7
IBM Keyboard Wedge
(Communication Setup)
This chapter provides the configuration bar codes for the IBM
Keyboard Wedge Synapse cables:
•
(Catalog No. 2755-HFC-SP1-01)
•
(Catalog No. 2755-HFC-SP2-01)
IBM Keyboard Wedge Synapse Cable Defaults
Scan the following bar code to set the IBM Keyboard Wedge Cables
to their default values. Defaults are indicated with an asterisk *.
Set PC Wedge Synapse Cable Defaults
Scan this label to set the IBM PC Wedge Synapse cable to the default
settings shown below.
IBM Keyboard Wedge
Parameters
Default Setting
Code on
Page:
Host
IBM PC/AT
IBM PS/2-50, 55SX, 60, 70, 80
3–2
Country North American 3–3
Bar Codes with Unknown
Characters
Send Bar Codes With Unknown
Characters
3–4
Intercharacter Delay 5 milliseconds 3–4
Parameter Set Parameter Set 1 3–5
Scan the bar code symbols for the settings you need to change.