Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 139)

Appendix
D
Publication 2755-6.7
SLC 5/03, 5/04 Controller
Application
This appendix describes how to configure and operate the scanner
when connected to an SLC 5/03, 5/04 controller.
!
ATTENTION: Do not install the RS-232 Synapse
cable with power applied to either the Synapse cable or
SLC controller. Failure to follow this caution may
result in damage to the scanner, Synapse cable, or SLC.
For additional reference you should refer to the following
publications:
•
Advanced Programming Software (APS) User Manual
•
Advanced Programming Software (APS) Reference Manual