Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 8)

Preface
Publication 2755-6.7
Publication 2755-6.7
Read this First
This guide provides the configuration bar codes for the following:
•
2-D Hand-Held Bar Code Scanners
(Catalog No. 2755-HTG-4)
•
RS-232 Synapse Cables
(Catalog No. 2755-HFC-SR2-01, 2755-HFC-SR3-01)
•
IBM or Compatible Keyboard Wedge Synapse Cables
(Catalog No. 2755-HFC-SP1-01, 2755-HFC-SP2-01)
•
DEC Keyboard Wedge Synapse Cables
(Catalog No. 2755-SV1–01, 2755-SV2-01)
•
Scanner Emulation Synapse Cable
(Catalog No. 2755-HFC-SA1-01)
Configuration Bar Code Symbols
The configuration bar code symbols are all Code 128. The scanner
is always enabled to read Code 128 symbols. Default settings are
indicated by an asterisk.
Indicates this Symbol
is the Default Setting
9600 *
Refer to the user manual for the 2-D Hand-Held Bar Code Scanners
(Publication 2755-6.4) for descriptions of the configuration settings.