Flexible interface module setup – Rockwell Automation 2755 2D Hand-Held Scanner User Manual
Page 136
Advertising
![background image](/manuals/580059/136/background.png)
C–4
Flexible Interface Module Application
Publication 2755-6.7
Flexible Interface Module Setup
You will need to configure the Flexible Interface Module. Refer to
the user manual for the protocol cartridge and interface module.
1. When configuring the Flexible Interface Module, first select 90B
to reset the configuration to factory defaults.
2. Configure screens 3, 21, and 11 (in this order) as shown on the
following pages:
Advertising