Rockwell Automation 2755 2D Hand-Held Scanner User Manual
Page 144
Advertising
D–6
SLC 5/03, 5/04 Controller Application
Publication 2755-6.7
2. Configure Channel 0 in the Channel 0 User Mode Configuration
screen.
Note that Termination 1 is set for \a or Line Feed [LF], and
Termination 2 is set for \d or Carriage Return [CR]. These
terminators, along with the ARL instruction in the SLC, allow you to
read one message at a time with [CR] [LF] terminators.
Advertising