Rockwell Automation 2755 2D Hand-Held Scanner - Manual (Page 134)

C–2 Flexible Interface Module Application
Publication 2755-6.7
Hardware Connections
The scanner connects to one of the three communication ports on the
Flexible Interface Module with an RS-232 Synapse cable (Catalog
No. 2755-HFC-SR2-01). The interface module requires an SFC2
Protocol Cartridge.
To RB Nodule Communications Port
Power Supply
Scanner Cable
RS-232 Synapse Cable
(2755-HFC-SR2-01)
SFC2 Protocol Cartridge
Flexible Interface Module
Note: The power supply
should be connected last.
Scanner Configuration
Configure the scanner using the bar codes described in Chapter 1.
The Flexible Interface Module does not require any specific scanner
configuration. However, you will need to configure the cable
communication parameters as described on the next page.