Chapter – Rockwell Automation 2755 2D Hand-Held Scanner User Manual
Page 54
Chapter
5
Publication 2755-6.7
DEC VT220/320/420
Keyboard Wedge Cable
(Communication Setup)
This chapter provides the configuration bar codes for the DEC
VT220/320/420 keyboard wedge Synapse cable:
•
(Catalog No. 2755-HFC-SV1-01)
DEC VT220/320/420 Keyboard Wedge Interface Cable Defaults
Scan the following bar code to set the DEC VT220/320/420
Keyboard Wedge Cables to their default values. Defaults are
indicated with an asterisk *.
Set DEC VT220/320/420 Wedge Synapse Cable Defaults
Scan this label to set the DEC VT220/320/420 Synapse cable to the
default settings shown below.
DEC VT220/320/420
Keyboard Wedge Cable
Default Setting
Code on
Page:
Host
DEC VT220 / 320
5–2
Country
North American
5–2
Bar Codes with Unknown
Characters
Send Bar Codes With Unknown
Characters
5–4
Intercharacter Delay
5 milliseconds
5–4
Parameter Set
Parameter Set 1
5–5
Scan the bar code symbols for the settings you need to change.