Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 104)

104 Rockwell Automation Publication 7000-UM151E-EN-P - January 2013
Chapter 3 Component Definition and Maintenance
Figure 78 - AFE Remote Transformer / Starter
AC/DC Power Supply
The load demands on the AC/DC converters are the DC/DC converter and up
to six IGDPS modules. The DC/DC is a fixed load; however, the quantity of
IGDPS modules will vary depending upon the drive configuration.
The AC/DC power supply accepts single phase voltage and produces a regulated
56V DC output for the DC/DC power supply and the HV IGDPS modules that
power the SGCTs. The input and output voltages are monitored and fail signals
are annunciated upon either voltage going below a pre-set level.
-Printer
-Operator Interface
-Relays
DC/DC CONVERTER
AC/DC Converter
56V DC
1000W/1500W
+5V-LOGIC
+/-15V-LOGIC
+/-24V-HECS
+24V-ISOLATORS
SENSE CABLE
20V
C Hold-up
20V Isolated
Gate Driver
Power Supply
DC Fail
Customer
Supplied
120V
1-ph
Line Filter
VFD Fan
380V 50Hz
or
460V 60Hz
3-ph
Tx Fan
+24V-XIO