Drive configuration – Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) User Manual
Page 213
Rockwell Automation Publication 7000-UM151E-EN-P - January 2013
213
Drive Programming and Parameters Chapter 5
Drive Configuration
This section describes how to:
• select alternate languages
• enter data in drive parameters
• assign tags to an analog port
• enable and disable a fault via a mask
• assign text to optional external fault inputs
• re-enter Setup Wizard
• configure the XIO link
• define tags as readable by a PLC.
Press [F8] to access the SETUP screen from the top level menu.
Figure 189 - Setup screen
The SETUP screen shows the current access level. 'Monitor'-level access restricts
drive configuration access to view-only; you cannot edit settings. You must have
'Basic' access or higher to modify drive operations.
At power-up, the interface defaults to 'Monitor’-level access. Press [F8] to change
the access level before beginning other configuration operations available from
this screen (
Configuring Access Levels on page 210
for
more information.
Figure 190 - Basic access level