Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 161)

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013 161
Component Definition and Maintenance Chapter 3
8. Press [Enter] to open the ‘Diagnostics Setup’ screen and assign the selected
parameter to Trace 1. Press
▼
to scroll to Trace 2 and repeat steps 3 – 8
above to assign a parameter to Trace 2.
Figure 128 - Diagnostics — Select Trace 2
9. Repeat above steps until you have assigned the desired parameters to all the
traces from Trace1 to Trace16.
10. Press [F9] to view the Trigger screen. The first letter in the second line on
the screen toggles between C (Continuous) and S (Single shot). Select S
for Single shot.
11. Press [F2] to view the Condition screen. The cursor automatically selects
the “=” (equal sign). This defines the trigger condition. Press
▲
or
▼
to
select “+” (plus sign) as the trigger condition for this example.
Figure 129 - Diagnostics — Select trigger condition