Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - ForGe Control (PanelView 550) - Manual (Page 251)

Rockwell Automation Publication 7000-UM151E-EN-P - January 2013 251
Drive Programming and Parameters Chapter 5
To change the current segment and/or offset, press [F7] to edit the
segment:offset (
Figure 246 ). Pressing [F7] toggles between the segment and
offset values, and the highlight indicates which field to edit.
Figure 246 - Edit the Segment: Offset
Edit the segment:offset address via the numeric keypad (values [0]-[9]) and arrow
keys. To enter a value [A]-[F], use
▲
or
▼
to cycle through the values; you can
also enter numeric values this way.
When you enter a character using an arrow key, press
►
to accept the character
and move to the next position in the field. Use
◄
to edit or remove the previous
character. When finished, press [Enter] or [F7] to accept the field entry. Press
[Delete] to abort the edit.
The screen displays the data at the relevant address, as shown in Figure 247 .
Figure 247 - Data at New Address
Database Download
The database download operation enables the operator interface to obtain
required information on demand. Call this function from any screen by pressing
[F10] +
▲
simultaneously.