Rockwell Automation 6180W-xxxx VersaView Workstation User Manual - Manual (Page 32)

Publication 6180W-UM001H-EN-P - August 2007
32 Operation
DIP Switch Settings for
Front-panel Keypad The workstation includes a pair of DIP switches that control the
operation of the front panel keypad. The switches are inside the rear
panel of the 1500W, and inside the top cover of the 1200W. The
switches are both set to the 1 position at the factory. The factory
setting is appropriate for all Windows applications. Under normal
circumstances there is no need to alter the switch settings. Keypad
operation is controlled by the switches as shown in the table.
Video Loopback Cable All 1200W workstations and 1500W series A workstations require that
you install the video loopback cable for proper operation. Make sure
the cable is connected between the VGA video output connector and
the screen display input connector.
SW1 SW2 Keypad Encoding
0 0 DOS application for legacy 6180W applications
0 1 Reserved, consult factory
1 0 Reserved, consult factory
1 1 Default setting for Windows applications
1