Rockwell Automation 6180W-xxxx VersaView Workstation User Manual - Manual (Page 36)

Publication 6180W-UM001H-EN-P - August 2007
36 Replace System Components
Remove the Covers To maintain, install, or upgrade computer components, you must first
remove the cover.
Remove the Top and Bottom Covers on the 1200W
Follow these steps to remove the top and bottom covers.
1. Disconnect power from the computer.
2. Remove the 7 screws from the top cover or the 11 screws from
the bottom cover.
3. Lift the cover from the chassis.
ATTENTION
Failure to follow proper safety precautions could result in
severe electrical shock and/or damage to the computer.