Rockwell Automation 6180W-xxxx VersaView Workstation User Manual - Manual (Page 45)

Publication 6180W-UM001H-EN-P - August 2007
Replace System Components 45
Install the Floppy Drive
1. Slide the floppy drive into the drive cage from the front, aligning
screw holes.
2. Fasten the floppy drive to the floppy drive bracket with six
screws.
3. Reinsert the drive cage into the chassis making sure to engage
lock points.
4. Fasten the drive cage with the two screws on the outside of the
chassis, next to the new floppy drive.
5. Connect the flat cable and power cable to the floppy drive.
6. Reinstall the back cover.