Use a touchscreen, Touchscreen serial port usage, Driver software – Rockwell Automation 6180W-xxxx VersaView Workstation User Manual User Manual
Page 61: For additional information, Resistive touchscreen technology, Appendix b - use a touchscreen
61
Publication 6180W-UM001H-EN-P - August 2007
Appendix
B
Use a Touchscreen
Computers with the touchscreen option are shipped with the
touchscreen and touchscreen controller installed and connected.
Touchscreen Serial Port
Usage
The optional touchscreen controller connects internally to the COM2
serial port. The touchscreen is factory configured with the proper
COM2 and touchscreen driver settings, so no user configuration is
required.
Driver Software
The touchscreen driver is already loaded on the computer. The driver
software is also on the accessory cd.
For Additional Information
For more information on setting up or operating a touchscreen or for
future driver upgrades, refer to
Resistive Touchscreen
Technology
Resistive touchscreens are activated when you apply pressure to the
touchscreen with your finger. You can operate a resistive touchscreen
while wearing gloves.
TIP
If it becomes necessary to reinstall the touchscreen driver, the
touchscreen utility will automatically detect the serial port used
by the touchscreen controller.
ATTENTION
!
Do not use sharp instruments to activate the touchscreen.
Scratching the surface of the touchscreen could damage the
unit.