Calibrate the touchscreen – Rockwell Automation 6180W-xxxx VersaView Workstation User Manual User Manual
Page 62
Advertising
Publication 6180W-UM001H-EN-P - August 2007
62 Use a Touchscreen
Calibrate the Touchscreen
The touchscreen supplied with the computer is factory installed and
calibrated.
Follow these steps to recalibrate the touchscreen.
1. Run the touchscreen configuration utility through the
PROGRAMS menu of the operating system.
2. Start the calibration routine offered within the utility.
3. Follow the calibration instructions given on the computer
screen.
Advertising