Rockwell Automation 4100 REC Resolver to Encoder Converter Installation and Setup Manual - Manual (Page 17)

Publication 999-126 - February 1996
12 Installation & Hook-Up
Figure 2.2
Mounting the REC next to a 1394 GMC on a system panel
Important: The REC can only be mounted on the left side (when
looking directly at the mounted 1394) of the 1394 GMC
System. This is due to cable specifications and module
expansion of the 1394.
REC
Optional
Second
REC for
Axis 2 and 3
Wireway
1394
GMC System
REC
Reset
Axis 0
OK Axis 1
OK
Axis 0 Resolver
Axis 0 Encoder
Power & Drives
Axis 1 Encoder
Axis 1 Resolver
A B
A B