Rockwell Automation 2711 PanelBuilder 1200 Transfer Utility - Manual (Page 29)

Transferring Via the Data Highway Plus
Chapter 4
and Remote I/O
4-3
You can’t download the PanelBuilder application file unless you have
already defined the Pass-Through Block Transfer Control Address using
PanelBuilder software:
As well, we strongly recommend that you define the Pass-Through
Download Bits using PanelBuilder.
Refer to the PanelBuilder Development Software User Manual or the
PanelBuilder 1200 Configuration Software for Windows User Manual for
more information.
To prepare the PanelView 1200 terminal for download, you must configure
the following two parameters:
Auto-Restart After Download—whether or not PanelView 1200
terminal will start executing the application file as soon as the download
is completed
Address Source—whether you want to use the currently loaded
application file’s address source, or whether you want to configure the
address source manually
To configure the PanelView 1200 terminal for Pass-Through:
1 Set the PanelView 1200 terminal’s Mode Select Keyswitch to
Configure.
2 Choose Pass-Through Download Options from the Configuration Mode
Menu.
The following illustration shows the Pass-Through Download Options
screen of a touch screen terminal. On a keypad terminal this screen will
appear slightly different.
Configuring Pass-Through
Parameters in the Application
File
Configuring the PanelView
1200 Terminal for
Pass-Through