Rockwell Automation 2711 PanelBuilder 1200 Transfer Utility - Manual (Page 5)

Preface
P-1
Preface
Welcome to Allen-Bradley’s PanelView 1200 Transfer Utility. With this
software you can transfer PanelBuilder applications to and from PanelView
1200 terminals.
You can transfer applications created in PanelBuilder 1200 Configuration
Software for Windows, or PanelBuilder Development Software for DOS.
PanelBuilder 1200 Transfer Utility runs on Windows 3.1/95/98 operating
systems only.
The PanelView 1200 Transfer Utility User Manual explains the different
methods of transferring application files between the computer containing
the PanelBuilder application and the PanelView 1200 terminal, and
provides step-by-step instructions for each method.
Preface
An overview of this manual, and a list of related publications.
Chapter 1, Introduction to the PanelView 1200 Transfer Utility
An introduction to the PanelView 1200 Transfer Utility, and the
different methods of transferring PanelBuilder applications.
Chapter 2, Setting Up the PanelView 1200 Transfer Utility
Step-by-step instructions for installing the PanelView 1200 Transfer
Utility and starting it up the first time.
Chapter 3, Transferring Application Files Serially
Step-by-step instructions for uploading and downloading
PanelBuilder applications using the Upload/Download cable.
Chapter 4, Transferring Via the Data Highway Plus and Remote
I/O
Instructions for transferring PanelBuilder applications over the Data
Highway Plus using the PLC-5 Remote I/O Pass-Through feature.
Chapter 5, Transferring Application Files with User PROMs
Welcome to PanelView 1200
Transfer Utility
What’s in the PanelView 1200
Transfer Utility User Manual?