Rockwell Automation 2711 PanelBuilder 1200 Transfer Utility - Manual (Page 6)

Preface
P-2
Information about User PROMs, and instructions for burning User
EPROMs and programming User EEPROMs.
Related Publications
Getting Started with PanelBuilder 1200 Configuration Software for
Windows
PanelBuilder 1200 Configuration Software for Windows User Manual
PanelBuilder 1200 Configuration Software for Windows Reference
Manual
PanelBuilder Development Software User Manual
PanelView 1200 Operator Terminals User Manual
Before you begin, you should already be familiar with:
Microsoft Windows 3.x or Windows 95 operating system (if you want to
install or run from Windows)
Microsoft

MS-DOS

3.0 or later. If you’re working with Windows,
you should be familiar with MS-DOS 3.3 or later.
If you have questions about the PanelView 1200 Transfer Utility, please
consult the manual first. If you can’t find the answer, contact
Rockwell Automation Technical Support Services:
Rockwell Automation
Technical Support
6680 Beta Drive
Mayfield Village, Ohio 44143
Contact your local Allen-Bradley office or call
USA (440) 646-5800 - FAX USA (440) 646-5801.
You’ll find the serial number for your PanelBuilder software on the card in
the front of the PanelBuilder User Manual. Please have this number ready
when you call.
Before You Begin
Technical Support Services