Rockwell Automation 1203-USB Converter - Manual (Page 12)

1-2 Getting Started
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
Components
Features
The features of the 1203-USB converter include the following:
• Connects to, and is compatible with, products that support the
Allen-Bradley DPI, DSI, and SCANport drive communication interfaces
(see
Compatible Products on page 1-3 ).
The 1203-USB converter autobauds to the appropriate communication
data rate that is used by the drive.
• Provides a means for configuration software tools to access parameters
in supported drives.
Item Part Description
➊ Computer Cable Port Plug the USB cable into this port.
➋ Status Indicators LEDs that indicate converter operation, data being received from
the computer, and data being sent to the computer. For more
information, see Chapter 4 , Troubleshooting .
➌ Drive Cable Port • DPI Drives or SCANport Legacy Drives:
Plug the 20-HIM-H10 cable into this port.
• DSI Drives:
Plug the 22-HIM-H10 cable (for PowerFlex drives) or the
2090-CCMUSDS-48AA0x cable (for Kinetix 3 drives) into this
port.
➍ 20-HIM-H10 Cable DPI or SCANport drive cable (1 m length) with male
26-pin-to-male 8-pin circular mini-DIN connectors.
➎
22-HIM-H10 Cable
DSI drive cable (1 m length) with male 26-pin-to-male RJ45
connectors for use with PowerFlex drives.
➏ USB Cable USB cable (2 m length) with a Type B connector on one end to
connect to the 1203-USB converter, and a Type A connector on
the other end of the cable to connect to a computer.
➐ 2090-CCMUSDS-48AA0x
Cable (ordered separately)
DSI drive cable (1 m or 3 m length) with male 26-pin-to-male
6-pin IEEE 1394 connectors for use with Kinetix 3 drives.
➍ ➎ ➏ ➐
➊
➋
➌
Cables Supplied with
1203-USB Converter
Cable Required for
Kinetix 3 Drive
(ordered separately)
1203-USB
Converter