Configuring the converter for rtu master mode – Rockwell Automation 1203-USB Converter User Manual
Page 73

Use with DriveExplorer Software
C-9
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
Configuring the Converter for RTU Master Mode
1. On the DriveExplorer 1203-USB Parameter List dialog box,
double-click converter Parameter 01 - [Adapter Cfg].
2. Set converter Parameter 01 - [Adapter Cfg] to a value of ‘3’ (RTU
Master).
3. Remove power from the drive to which the 1203-USB converter is
connected, which temporarily ends communication.
4. Electrically connect all drives to create the RTU Master network.
See
for details.
Accessing Drives on the RTU Master (Serial Multi-drop) Network
Using DriveExplorer software enables you to monitor, configure, and
control any of the drives on the RTU Master (serial multi-drop) network.
You can also monitor and configure the 1203-USB converter.
1. Apply power to all of the drives on the RTU Master network.
2. In the DriveExplorer application window, choose Explore > Connect >
Serial to Network.