Removing the converter, Removing the converter -13 – Rockwell Automation 1203-USB Converter User Manual
Page 31
Advertising
Installing the Converter
2-13
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
Removing the Converter
1. Disconnect the cable from the drive, and then from the converter.
To disconnect the cable, press on the cable latch and then pull it out.
2. Disconnect the USB cable from the converter, and then from the
computer.
!
ATTENTION: Risk of injury or equipment damage exists. If the
converter is transmitting control I/O to the drive (indicated by a
steady green Diamond status indicator), the drive may fault when
you remove or reset the converter. Determine how your drive will
respond before removing or resetting a connected converter.
Advertising