Safety precautions, Quick start, Safety precautions -6 quick start -6 – Rockwell Automation 1203-USB Converter User Manual

Page 16

Advertising

1-6

Getting Started

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

Safety Precautions

Please read the following safety precautions carefully.

Quick Start

This section is provided to help experienced users quickly start using the
1203-USB converter. If you are unsure how to complete a step, refer to the
referenced chapter.

ATTENTION: Risk of injury or equipment damage exists. Only
personnel familiar with drive and power products and the
associated machinery should plan or implement the installation,
startup, configuration, and subsequent maintenance of the product
using the converter. Failure to comply may result in injury and/or
equipment damage.

ATTENTION: Risk of injury or equipment damage exists. If the
converter is transmitting control I/O to the drive (indicated by a
steady green Diamond status indicator), the drive may fault when
you remove or reset the converter. Determine how your drive will
respond before removing or resetting a connected converter.

Step Action

See

Review the safety precautions for the converter.

Throughout this manual

Install the converter.

When used with DPI drives or SCANport drives:
a. Connect the 1203-USB converter to the drive with a

20-HIM-H10 cable (see

Figure 1.1

b. Connect the 1203-USB converter to a computer with a USB

cable.
Make sure that power has been applied to the drive.

When used with DSI drives:
a. Connect the 1203-USB converter to the PowerFlex drive

with a 22-HIM-H10 cable, or to the Kinetix 3 drive with a