Rockwell Automation 1203-USB Converter - Manual (Page 14)

1-4 Getting Started
PowerFlex 1203-USB Converter User Manual
Publication DRIVES-UM001D-EN-P
DSI Products
• PowerFlex 4 drives
• PowerFlex 4M drives
• PowerFlex 40 drives
• PowerFlex 40P drives
• PowerFlex 400 drives
• PowerFlex 520-Series drives (Some limitations of use - Custom groups
and Application groups are not supported)
• Kinetix 3 drives (Only point-to-point connection supported)
SCANport Products
• 1305 AC drives, firmware 2.01 or later
• 1336 FORCE ™
drives
• 1336 IMPACT ™
drives
• 1336 PLUS drives
• 1336 PLUS II drives
• 1336 REGEN Line Regeneration Packages
• 1336 SPIDER drives
• 1394 Motion systems
• 1397 DC drives
• 1557 Medium Voltage drives
• 2364 Regenerative DC Bus Supply Units
• SMC Dialog Plus ™
Smart Motor Controllers
• SMP-3 Smart Motor Protectors
Required Equipment
Most of the equipment that is required to use the 1203-USB converter is
shipped with the converter, but some equipment you must supply yourself.
Equipment Shipped with the Converter
When you unpack the converter, verify that the package includes the
following:
❑ One 1203-USB converter
❑ One USB cable, 2 m (6.6 ft.) long
❑ One 20-HIM-H10 cable, 1 m (3.3 ft.) long
❑ One 22-HIM-H10 cable, 1 m (3.3 ft.) long