SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 14)

Section 3: DTD Mode Data Transfer Device Operating Instructions
When the transfer begins the following screen appears and the green LED turns on. If at any point you lose communications with the
door controller, the red LED turns on. You have 10 seconds to move the DTD back into range.
When the data transfer is complete the following message appears. Press the left arrow to exit to the menu.
If a matching door file is not found, the following message appears. When you press ENTER you are brought to the manual search
screen, which allows to choose a door from the list. Please refer to the following section discussing the MANUAL SEARCH menu.
3.1.2 Exporting using the MANUAL SEARCH Menu
The MANUAL SEARCH option is used when you are communicating to a door controller for the first time or if a door is not found.
When you select this option, the search screen is displayed. To navigate through the list of doors use the up and down arrows.
Page 14 of 26 Corbin Russwin # FM 296; Sargent # A7973B Rev. 1.1