SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 16)

Section 3: DTD Mode Data Transfer Device Operating Instructions
When data transfer is complete, the message below appears. Press the up or down arrows to move through the door list.
3.2 UTILITIES Menu
To access the UTILITIES Menu press the ENTER button from the Start-up Screen. Next you are presented with three choices. Press
the down arrow to move the cursor to the UTILITIES option and press the ENTER key. You have four choices in this menu, as shown
below.
3.2.1 GET DOOR INFO
The GET DOOR INFO menu item is used to retrieve information from the door controller. First, enter your Comm Unlock code on
the door controller. Next aim your DTD at the Infrared (IR) port on the controller and press the ENTER key. If successful, the door
information is immediately displayed on the DTD screen. This information includes the door controller serial number, firmware part
number and version, time and date.
3.2.2 SHOW DTD CLOCK
The DTD maintains the current time and date that it receives from the PC. To view the current DTD time and date, select this menu
option. You can only update this time and date using the PC software.
Page 16 of 26 Corbin Russwin # FM 296; Sargent # A7973B Rev. 1.1