SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 19)

Data Transfer Device Operating Instructions Section 3: DTD Mode
3.4 Security Risk Warning (W01)
When the DTD attempts to communicate to the door controller during the import/export process, it first asks the controller if program
mode was entered. If program mode was entered manually on the controller, the following warning is displayed. This warning means
that someone may have programmed data into the controller that doesn't match the PC software database. When this message is
displayed you can either ignore it for the time being and continue with your import/export or you can press the back arrow (4 key) to
cancel the operation. To correct the situation return to the PC and choose the full export options. Please refer to the PC software
documentation for complete details about performing this action.
Corbin Russwin # FM 296; Sargent # A7973B Rev. 1.1 19 of 26