Passport 1000 pg cylindrical lock, Configuring the locklink™ software – SARGENT Passport 1000 PG Cylindrical Locks User Manual

Page 15

Advertising
background image

10/31/12

A7808B 15

Copyright © 2012, Sargen

t Manufacturing Company

, an A

SS

A AB

LO

Y G

roup company

. All right

s reser

ved

.

Reproductions in whole or in par

t without express writ

ten permission of Sargen

t Manufacturing Company is prohibited

.

Passport 1000 PG Cylindrical Lock

4. The Pocket PC will enable Bluetooth and
begin discovery. If you receive a warning,
"No Devices Found," then check again to see
the blue light flashing on the Contact Card and
tap ‘Retry’ .

If the blue light is not flashing, remove the

Contact Card, wait for the lights to go dark,
then reinsert it before tapping ‘Retry’.

If this step fails repeatedly, then contact
PERSONA technical support at (800)–481–8464.

1. Enter "1234" when prompted for ‘Passcode’.

2. Tap the ‘COM Ports’ tab at the bottom of the screen.

Note the COM port number assigned to the

Firefly device.

NOTE: If you do not see the FireFly-EAE0 device

in the COM port list, tap ’New Outgoing

Port’ and pick the FireFly-EAE0 device before
tapping "Next’.

3. Choose an available COM port number
(COM8 is often a good choice) and tap ’Finish."

Once you can see the " " list entry,
highlight it and tap ‘Next’.

Configuring the LockLink™ Software

Advertising