Passport 1000 pg cylindrical lock, 3 – prepare frame for strike, 4 - latch bolt and fire stop plate installation – SARGENT Passport 1000 PG Cylindrical Locks User Manual
Page 7
10/31/12
A7808B 7
Copyright © 2012, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
Passport 1000 PG Cylindrical Lock
3 – Prepare Frame for Strike
Install strike (Fig. 3A)
Fig. 5A
(2) #8-32 x 3/4” Screws
Fig. 3A
Outside of Door
IMPORTANT: Latch bevel must match door bevel and
deadlocking latch must stop on strike when door is closed.
Strike
Deadlocking Latch
Fire Stop Plate
Slot
(2) #8 x 1/2” Self-Tapping Screws
for Wood and Metal Doors
(2) 1/8” Diameter Holes
Fig. 4A
Fig. 4B (Detail)
1-1/2”
Centerline of Latch
Front and Strike
Latch Assembly
(See Fig. 4B Detail)
(2) #8-32 x 3/4”
Combination Screws
A. Latch Bolt Installation:
1. Install latch with beveled bolt facing strike.
2. Attach with two screws.
DO NOT tighten completely at this time.
B. Fire Stop Plate:
4 - Latch Bolt and Fire Stop Plate Installation
IMPORTANT: Fire stop plate is required
for all fire-rated doors.
1. Attach fire stop plate (P/N 52-0033)
using two screws (Fig. 4A).