SARGENT 1431 Series Aluminum Closer - Manual (Page 6)

6
Copyright © 1998, 2000, 2002,2005, 2207-2009, 2011, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part
without the express written permission of Sargent Manufacturing Company is prohibited.
11/01/11
A7139K
• Select closer mounting position based Reveal Depth as listed below
1
TOP JAMb APPLICATION
• Locate and mark hole locations
Note: 3/32" pilot holes are required when Self Tapping Screws are being used
If machine screws are being used, use a drill #16 (.177) and a #12-24 tap
2
• Install closer body onto the door with 5/8" power adjustment nut end away from hinge
• Install foot & rod assembly onto the frames
3