Great Plains 2525P Operator Manual - Manual (Page 39)

4/23/2010 118-915M
37 Adjustments
Changing Seed Meter Wheel for
20 Series Openers
Choose the correct seed meter wheel for the type
of seed you will be using. Be sure to use the same
wheel type on all meters.
To change seed meter wheels:
Refer to Figure 49
1. Shut off seed flow to meters by moving sliding
seed tubes. For more information see page
34.
Refer to Figure 50
2. Clean out meter. For more information see
page 35.
Refer to Figure 51
3. Push in spring-loaded wheel retainer and
turn. Pull off wheel retainer and spring.
Figure 49
Sliding seed tubes shut off
22852
Sliding seed
tubes
Figure 50
Meter clean out
22857
Wheel retainer
and spring
Figure 51
Remove wheel retainer and spring
22860