Great Plains 2525P Operator Manual - Manual (Page 83)

4/23/2010 118-915M
81 Veris Drive Operating Instructions
Refer to Figure 108
8. Enter number of rows here using Up/Down ar-
row keys. Press Function key to advance to
next window.
Refer to Figure 109
9. Enter your planned planting speed using Up/
Down arrow keys. Calibration mode will not
accept a speed higher than 10 mph. Press
Function key to advance to next window.
Refer to Figure 110
10. Enter the amount of seed you want to mea-
sure. For volumetric metering, this should be
at least 1/4 of a lb. For singulated metering, at
least 100 seeds should be selected. Press
Function key to advance to next window.
Figure 108
Figure 109
Figure 110
22721
22720
22722