Great Plains 2525P Operator Manual - Manual (Page 85)

4/23/2010 118-915M
83 Veris Drive Operating Instructions
Refer to Figure 114
13. Continuing to verify that the drive area is
clear, press the Engage key to start drive ro-
tation. Pressing Function key will exit calibra-
tion mode.
Refer to Figure 115
14. While the drive is rotating, the display window
shows the time remaining and the “Out” rate.
CONTINUE TO MONITOR DRIVE AREA
DURING DRIVE ROTATION. PRESS THE
ENGAGE KEY (OR OFF KEY) TO STOP
DRIVE DURING CALIBRATION
Refer to Figure 116
15. After Calibration meter rotation has ended,
this screen will appear.
Figure 114
Figure 115
Figure 116
22727
22726
22728