Great Plains 2525P Operator Manual - Manual (Page 84)

2525P and 2520P
118-915M 4/23/2010
82
Refer to Figure 111
11. The cab console is informing you the length of
time that the drive will be operating, in order to
meter the amount of seed you have request-
ed, at the calibration number, drill width, and
number of rows you have selected. Press
Function key to advance to next window.
Refer to Figure 112
The drive is about to operate, meaning there is a dan-
ger of entanglement if anyone is in the drive area. Be
sure to verify that no one is near the drive area before
advancing to the next step.
Refer to Figure 113
12. Only after you have verified the drive area is
clear, press the up arrow key to initiate cali-
bration mode. If drive area isn’t clear, press
Down arrow key to exit calibration mode.
Figure 111
Figure 112
Figure 113
22724
22723
22725