Great Plains 2525P Operator Manual - Manual (Page 43)

4/23/2010 118-915M
41 Adjustments
Refer to Figure 61
6. While the meter is removed take time to in-
spect the meter drive chain and sprocket.
Refer to Figure 62
7. Install the new meter along with the lower sec-
tion of the sliding seed tube.
Refer to Figure 63
8. Engage the upper latch. Make sure the ta-
pered line-up pins near drive sprocket engage
completely in line-up holes.
22868
22869
22870
Figure 62
Figure 63
Figure 61